Kit Nmea converter with remote control for autopilot ATM105-C2
The ATM105C2 kit includes a ATM105A2 base station and a ATM105B remote control for Raymarine Seatalk autopilots.
The ATM105A2 is suitable for boats equipped with navigation equipment without NMEA2000 requirements (mainly boats built in the 80′ and 90′).
458,81€
Out of stock
Main features
Base Station:
1 full NMEA0183 channel at 4800 baud.
1 full NMEA0183 channel at 4800/9600/38400/115200 baud.
1 input NMEA0183 channel at 4800/38400 autobaud.
Seatalk Bus.
WFii access point, bidirectional UDP mode. NMEA0183 messages.
Links with the ATM105B Remote control. It can connect up to 3 remotes simultaneously.
Anchor windlass relay.
Note: To operate with Evolution autopilot series you must use the Raymarine ST1 to STNG adaptor.
Remote Control:
Is the lightest and smallest on the market (90x60x14 mm).
Total control of the autopilot. It displays the most important navigation data and alarms (depth, pilot, waypoint, etc.).
Remote control for the anchor windlass, showing the depth.
Selectable backlight display. At the same time, it regulates the lighting of ST40 and ST60 instruments.
Slightly raised buttons.
Powered by long autonomy lithium battery. Induction charge through the included base.
Related Products
ATM105-C3
The ATm105-C3 pack is recommended for boats that already have a Nmea 2000 network or intend to install it. It has 3/4 Nmea0183 differential optoisolated inputs, 2 differential Nmea outputs and a bidirectional Seatalk channel, as well as WiFi access.
