Nmea 2000 SeaTalk Wifi converter ATM105-A1N
It is our converter / gateway with triple protocol: NMEA0183, NMEA2000 and Seatalk. With Wifi.
It is the most recommended option if you want to integrate traditional navigation instruments with the new ones based on NMEA2000 and use navigation apps for mobiles, tablets, etc., when the remote control for the autopilot is not required (ATM105.B)
294,39€
Out of stock
Main features:
1 full NMEA0183 channel at 4800 baud.
1 input NMEA0183 channel at 4800/9600/38400/115200 baud.
Seatalk Bus.
NMEA2000 (SeatalkNG / SimNet).
Wi-Fi access point, bidirectional UDP mode. NMEA0183 messages.
As an example, the ATM105A1N can interconnect the following equipment:
Raymarine instruments ST40/ST60 /ST60+. GPS/Raymarine Plotter with Seatalk.
NMEA0183, channel 1: GPS or Plotter, or instrument with NMEA0183 from any manufacturer.
Diverse instruments and GPS/Plotter from any manufacturer with NMEA2000, SeatalkNG (ST70) or SimNet.
NMEA0183, channel 2: AIS with NMEA0183 output, 38400 baud.
Related Products
With 3 inputs Nmea0183 to connect old equipment (wind, gps / plotter, AIS, and Seatalk channel to connect old Raymarine ST instruments and ST1000 to 7000 pilots and smartpilot. It does not have Nmea 2000 to connect new generation equipment with Seatalk NG and Simnet .
With 3 Nmea0183 inputs to connect old equipment (wind, gps / plotter, AIS), 1 Seatalk channel to connect old Raymarine ST instruments and ST1000 to 7000 pilots and Smartpilot) and with Nmea2000 to connect any new equipment, including Ais, with Seatalk NG and Simnet.
